Toe Clamps
Toe Clamps are powerful, low profile clamps that grip on the side of the workpiece leaving the top surface open. This minimizes interference with cutting tools or measuring instruments. Ideas for use on mills, planners, jig borers, drill presses, and faceplates.
- Steel or brass toe and special washer are included with each clamp.
- Slotted for 1/2" or M12 Cap Screws
- Black Oxide finish
- Available in Fixture Pro Design Software
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
|
| STEEL | STANDARD | 3 1/4 | 13/16 | 1/8 | 2 | 1/4 | 1 1/2 | 7/8 | 1.0 | | |
| STEEL | HIGH GRIP | 3 1/4 | 13/16 | 1/8 | 2 | 7/8 | 1 1/2 | 7/8 | 1.0 | | |
| STEEL | STANDARD | 4 11/16 | 13/16 | 1/2 | 2 3/4 | 1/4 | 1 1/2 | 7/8 | 1.4 | | |
| STEEL | HIGH GRIP | 4 11/16 | 13/16 | 1/2 | 2 3/4 | 7/8 | 1 1/2 | 7/8 | 1.7 | | |
| STEEL | STANDARD | 6 5/8 | 13/16 | 1 | 3 3/4 | 1/4 | 1 1/2 | 7/8 | 2.0 | | |
| STEEL | HIGH GRIP | 6 5/8 | 13/16 | 1 | 3 3/4 | 7/8 | 1 1/2 | 7/8 | 2.3 | | |
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).
