Small Swing Cylinders
These versatile swing cylinders/clamps can be used as single or double acting rotating clamps, or push/pull cylinders. The piston in the Swing Cylinders rotate 90° to the right, but may easily be changed to 90° left rotation, or to no rotation at all.
- Standard with an arm.
- Can be mounted using four #10 cap screws or the 1"-12 thread on the O.D. of the cylinder.
- Optional components include the threaded mounting bracket and jam nut shown below.
- Can be used as a non-rotating clamp.
- Maximum recommended flow rate is 20 cubic inches per minute per clamp (approximately 1 second clamp time).
- Available in 3D Solid Models from the web.
- Note: Arm length can affect clamping pressures. All swing cylinders must be used with flow limit valves to dampen the rotating action. See max flow rate limit shown above.
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.

CAD Download Link
|
| (Pull) | (Push) |
---|
Operating Volume (Cu. in) | 0.18 | 0.33 |
---|
Effective Piston Area ( Sq. in) | 0.24 | 0.44 |
---|
Minimun Operating Presssure (PSI) | 120 | |
---|
Maximum Operating Pressure (psi) | 3000 | 3000 |
---|
Maximum Output Force | 730 | 1320 |
---|
Stroke (in) Full | 0.75 | 0.75 |
---|
Stroke (in) Rotating | 0.5 | 0.5 |
---|
Stroke (in) Clamping | 0.25 | 0.25 |
---|
Weight (lbs) | 1 | 1 |
---|
|
| Mounting Block |
| Optional Double Arm |
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).